Image Files; Introduction To Image Files - Barco iCon H600 Owner's Manual

A dialog box is displayed
Image 8-55
6. Use ←or →, the numeric keys on the remote, or the keypad to change the runtime warning setting.
W
ARNING
technician.
8.6

Image files

Overview
•

Introduction to Image files

• Load file
• Forced file load
• Auto Image
• Edit file
• Save as (create a custom file)
• Rename file
• Copy
• Delete
8.6.1 Introduction to Image files
Image files
An image file contains the main characteristics of a source (number of active lines,...). The projector's memory contains a list of files
corresponding to the most common sources : standard files.
When a new source corresponds to one of these files, a custom file is created. The file is not automatically saved as a custom file.
The Save as... function allows to create and save a custom file.
The active file can always be edited in order to fit exactly the source specifications.
AutoImage creates automatically the best suited image file (custom file) for a new source. AutoImage is used
when :
- a new source is detected: AutoImage creates a new custom file which can always be edited if necessary.
- the AutoImage is launched via the button on the RCU, the projector's OSD or from the desktop's OSD
File notation
The notation of the image file happens as follows :
/Standard/SXGA+@60.xml
Type of file : standard or custom
Image 8-56
R5976821 BARCO ICON 15/03/2007
:
Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
file extension = xml
Vertical freq
Resolution
8. Advanced
103