Source Selection; Composite Video - Barco iCon H600 Owner's Manual

8. Advanced
In some cases an alphanumeric value (file name, ...) has to be entered. Use ↑ or ↓ to scroll through the char-
acter values once the input field is activated.
Following characters can be browsed in this particular order:
Decimal scroll list: 0123456789
Signed decimal scroll list: 0123456789-
ASCII scrolllist:ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789+-*/&@#.;.abcdefghijklmnopqrstuvwxyz
8.2

Source selection

Overview
• Source selection
•

Composite video

• S-Video
• RGB-YUV
• PC
• DVI
8.2.1 Source selection
Selecting a source
The Source selection menu allows to select one of the different inputs. Another method to select an input source is via the remote
control using the numeric keys or by using the local keypad.
Selecting a source from the Icon's menubar (OSD) will always display that source in a full screen mode.
The source names in the menubar are adapted automatically depending on the type signals connected to the projector ( the signals
are scanned). For example :
• L1 RGB
• L2 DVI
• ...
In this case, an RGB signal is connected to the first layer (L1), a DVI signal is connected to the second layer (L2) ,...
When selecting a source with a different resolution (and/or aspect ratio) than the projector's resolution (and/or
aspect ratio ), the source can be shown in its native resolution or can be re-scaled to the projector's resolution,
the latter case brings of course some lost of quality.
For more info on resolution match see the Show native resolution function in the Image menu.
The resolution of the projector is 1920x1080 with an aspect ratio of 16:9
8.2.2 Composite video
When
Select composite video when you are in presence of a PAL or NTSC video signal.
A composite video signal is often available on a yellow cinch connector of a Camera, VCR or DVD player.
How to select the composite video input ?
1. Press MENU to activate the Toolbar
2. Press ↓ to Pull down the Source Selection menu
The menu will contain one item Lx Video, x being the layer on which the composite video is connected (for example L2 Video if
the signal is connected to layer 2)
3. Use ↑ or ↓ to select Lx Video
78 R5976821 BARCO ICON 15/03/2007