Advanced Settings - Barco iCon H600 Owner's Manual

Start menu configuration
1. Click on the Start menu tab of the projector controls menu
The menu is displayed
Image 7-8
2. Choose between the standard Windows
outs)
3. It may be necessary to restart the server for the changes to take effect

Advanced settings

Image 7-9
• Enable window polling : This allows to synchronize the window environment with the actual projector PiP interface. Note that
this is not recommended when working exclusively in the desktop environment.
Always enable window polling when working in multiple environments, for example
when using the RS232 communication.
• Add new windows in native resolution : This setting allows to choose whether the source is added in native resolution or not.
• Show all sources in Start menu: Choose if all sources or only addable (present) sources are shown in the My sources menu.
R5976821 BARCO ICON 15/03/2007
start menu (My Pictures/My Music) or the Barco start menu (My Sources/My Lay-
TM
7. Desktop Management
75