Pre-Programming Rcu Quick Acces Keys - Barco iCon H600 Owner's Manual

5. Setup
Image 5-19
7. Press ENTER
The language is adapted and a bullet shows the active selection.
5.9.2

Pre-programming RCU quick acces keys

What can be done ?
The 3 function keys on top of the RCU can be associated with a particular item in one of the menus.
Each function which is not password protected or does not have a key on the RCU can be associated to a function key.
How to get an overview of the quick access keys ?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Quick access keys
Image 5-20
5. Press ENTER
A textbox appears on the screen.
How to program the quick access keys ?
1. Scroll through the menus to the desired menu item
2. Push the desired function key for 3 seconds
42 R5976821 BARCO ICON 15/03/2007