Input Boards Specifications; Input Section Of The Icon : Default Configuration; Rgb Analog Input Board; Dvi Digital Input Board - Barco iCon H600 Owner's Manual

• DVI output & RS232 module
Image 4-14

Input section of the Icon : default configuration

The iCon is by default equipped as follows:
• Slot 1 : RGB input board
• Slot 2 : RGB input board
• Slot 3 : DVI input board
• Slot 4 : empty
• Slot 5 : DVI output board
4.5.3.2

Input boards specifications

RGB & Video analog input board
This board includes :
• RGBHV 5 BNC input :
RGBHV ampl = 0.7V ± 3dB
75 Ω terminated
• Composite video input :
1.0 Vpp ± 3dB
75 Ω terminated
No loop through
• S-Video input
R / PR G / Y B / PB
Image 4-15

RGB analog input board

DVI & Computer input board
This board includes :
• DVI single link digital input
even though the connector is of the DVI-I type, the analog part is not supported.
• Computer input
TTL sync : U
min
RGB ampl = 0.7V ± 3dB
DVI
Image 4-16

DVI digital input board

DVI output board
This board includes :
R5976821 BARCO ICON 15/03/2007
Hs / Cs Vs VIDEO S-VIDEO
= 2.0V
4. Installation
25