History; Reset Lamp Runtime - Barco iCon H600 Owner's Manual

8. Advanced
When switching from the dual mode to the single mode the lamp with the longest runtime is switched off.
If the runtimes are equal (if the projector has always been operated in dual mode) then lamp 1 is switched out.
When switching to single mode, returning to the dual mode will not be possible in the first 60 seconds, Dual in
the menu is greyed out and the LED is flickering, showing that hot restrike (restart) of the lamp is impossible
during that time laps (60 sec).
8.5.3

History

How to view the history ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select History
Image 8-48
5. Press ENTER
A textbox is displayed
Image 8-49
8.5.4

Reset lamp Runtime

When to reset the lamp runtime ?
Reset the lamp runtime whenever you replace a lamp
W
ARNING
technician.
100
:
Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
R5976821 BARCO ICON 15/03/2007