Installation; Transceiver Installation - GE TransNET 900 Reference Manual

4.0 INSTALLATION

Figure 9 shows the contents of a typical transceiver shipment. Check the
contents against the packing list secured to the outside of the shipping box.
Accessories and spare parts kits, if any, are wrapped separately. Inspect all
items for signs of damage and save all packing materials for possible re-ship-
ment.
MOUNTING
BRACKETS
User documentation will be provided as a paper manual and/or as a PDF on
the "MDS TransNET Support Package CD" (P/N 03-2708A01). The CD
includes:
• Installation & Operation Guide in PDF (Also known as Adobe
Acrobat™)
• TransNET Configuration Software
If a paper copy is required but not provided with your shipment, please
contact the factory Customer Support Team.

4.1 Transceiver Installation

The following is an overview of a typical procedure for installing the trans-
ceiver. In most cases, these steps alone will be sufficient to complete the
installation. Should further information be required, contact the factory using
the information given on the inside back cover of this manual.
If you are installing a tail-end link system, you should also review Section
(Page 18) for important details on configuration.
NOTE: It is recommended that the Master station be installed first. In this way, it will be
possible to quickly check the operation of each associated Remote station as it
is placed on the air.
1. Mount the transceiver to a stable surface using the brackets supplied with
the radio. (Fasteners/anchors are not supplied.)
dimensions of the transceiver case and its mounting brackets. If possible,
14 MDS TransNET Ref. Manual
2-PIN
POWER PLUG
Figure 9. Typical Transceiver Shipment
Invisible place holder
SPARE FUSE
Figure 10
MDS 05-2708A01, Rev. F
INSTALLATION &
OPERATION GUIDE,
AND SOFTWARE
(CD AND/OR MANUAL)
4.3
shows the