GE TransNET 900 Reference Manual page 53

SHOW CON
Show Virtual Connection Status
Shows virtual connection status established by the latest ATDT command
sequence. (Works only with
If no connection is established, it displays
If a connection is active, it will display:
<Master unit address> TO <Remote ("dialed") unit address>
SHOW PWR
Show Measured RF Transmit Power
The
SHOW PWR
in dBm. Unlike the
being measured, not the programmed RF power setting.
SHOW SYNC
Show Clock-Synchronization Master Network Address
When used at a Remote station, this command will display
and
Unit Address
synchronized. The network depth at the Remote, defined as the number of
downstream links from the Master, is displayed in parentheses.
works for Dependent Masters. A value of zero (0) means the
SHOW SYNC
station is a Master synchronized to a Clock-Sync Master. The
command will display an asterisk (*) after depth value if the radio is operating
with co-located Masters.
SKIP [NONE, 1...8]
Skip Radio Operating Zones
This command sets or displays which, if any, of the eight zones will be
skipped from the radio's hopping sequence. Skipping zones is one way of
dealing with constant interference on one or more frequencies in the radio's
operating band. See
information on dealing with interference.
Tables 13, 14, 15
command parameter is either the keyword
up to four digits where each digit 1...8 represents a corresponding zone to
skip. (For zone parameter input, the digits can appear in any order and can be
optionally separated by a blank space.) The
Remote radios. (Remotes must be synchronized with the Master radio to
display the skip status.)
MDS 05-2708A01, Rev. F
AT ON
command displays the actual (measured) RF power output
command, this command shows the actual level
PWR
of the Master or Extension radio to which the Remote is
"A Word About Radio Interference" on Page 8
and 16 show the frequency range covered by each zone. The
. See"AT [ON, OFF]" on Page
.
NONE
or an undelimited string of
NONE
command is display-only at
SKIP
MDS TransNET Ref. Manual
29)
.
Extended Address
SHOW SYNC
for more
41