GE TransNET 900 Reference Manual page 39

Table 10. Operating Status—Display Only (Continued)
Command
REPEAT
Details Page 38
RETRY
Details Page 38
RSSI
Details Page 38
RTU
Details Page 39
RXTOT
Details Page 40
SAF
Details Page 40
SER
Details Page 40
SHOW CON
Details Page 41
SHOW PWR
Details Page 41
SHOW SYNC
Details Page 41
SKIP
Details Page 41
SLEEP
Details Page 42
SREV
Details Page 42
STAT
Details Page 43
TEMP
Details Page 43
UNIT
Details Page 43
XADDR
Details Page 44
MDS 05-2708A01, Rev. F
Description
The fixed downstream re-send count.
The maximum upstream re-send count for
ARQ (Automatic Repeat Request) operation.
Received signal strength indicator (in dBm).
Unavailable at Master unless SETUP is
enabled.
RTU simulator's operational status (ON/OFF)
The amount of time (in seconds) to wait before
issuing a time-out alarm.
Store-and-forward mode status in this unit.
(ON/OFF)
Serial number of radio
Display virtual modem connection status
RF output power.
Measured RF power in dBm.
Information on synchronization source
Frequency zones that are skipped
Radio's Sleep Mode setting.
(At Remotes Only)
Transceiver firmware revision level
Current alarm status
Transceiver's internal temperature (°C)
Programmed unit address for
network-wide diagnostics
This unit's Extended address
MDS TransNET Ref. Manual 27