GE TransNET 900 Reference Manual page 38

Table 10. Operating Status—Display Only (Continued)
Command
ASENSE
Details Page 29
BAUD
Details Page 29
BUFF
Details Page 30
CODE
Details Page 30
CTS
Details Page 31
CTSHOLD
Details Page 32
DEVICE
Details Page 32
HOPTIME
Details Page 34
LPMHOLD
Details Page 36
MODE
Details Page 36
MRSSI
Details Page 37
OWM
Details Page 37
OT
Details Page 37
OWN
Details Page 37
PORT
Details Page 37
PWR
Details Page 38
26 MDS TransNET Ref. Manual
Description
Current sense of the alarm output.
Data communication parameters. Example:
BAUD 9600 8N1
Data buffering mode: ON = seamless data,
OFF = fast byte throughput
Security/encryption operational status.
"NONE" (Inactive), or "ACTIVE"
CTS delay in milliseconds (0–255 ms)
"Hold time" that CTS is present following last
character from DATA port.
Device behavior
Alternatives: DCE and CTS KEY
Hop-time value in milliseconds (ms).
Time (0-1000 ms) provided to give an RTU
time to respond before the radio goes to sleep.
Current operating mode:
M = Master
R = Remote
X = Extension (Repeater)
Minimum RSSI level required to preserve syn-
chronization with a Master radio for Remotes
in mobile service.
Owner's message or site name
Status (ON/OFF) of the 1-second delay on
delivery of RXD serial data.
Owner's name or system name
Current data port (DATA connector) interface
signaling mode: RS232 or RS485
Forward power-output setting in dBm
MDS 05-2708A01, Rev. F