DFI 486-OCV Plus User Manual page 38

Pentium OverDrive Ready System Board
TM
The upper right hand corner shows the base memory
size and extended memory size of your system. You
cannot alter these items; your computer automatically
detects and displays them.
The left side of the screen lists the modifiable param-
eters. You can change the date, time, hard disk drive (C
and D), type of floppy drive (A and B), primary display,
and keyboard options. The Daylight Savings function is
intended for use in notebook computers and is not
supported by the 486-OCV Plus, so it does not matter
how it is set.
On the lower right hand corner is a calendar that shows
the current date.
The box at the lower left provides information on each
highlighted parameter.
Navigation and menu selection instructions are located
below the information box. Use the up or down arrow
key to move between options. Once you have high-
lighted the option you wish to change, use the <Page
Up> or <Page Down> key to view the available selec-
tions for that option.
If you have added a hard drive, you must select the
appropriate type for the drive. The 486-OCV Plus has
46 pre-set types and one user-definable type.
The table in Appendix H gives a complete listing of the
available drive types. Any given hard drive must be set
to one specific drive-type number. Please refer to your
hard drive documentation to find the appropriate type
number.
3-4 u Initial Setup Program