Troubleshooting Checklist - DFI 486-OCV Plus User Manual

Pentium OverDrive Ready System Board
TM
v Troubleshooting Checklist
If you experience difficulty with the 486-OCV Plus
system board, please refer to the checklist below. If you
still cannot isolate the problem, please contact your
dealer.
1) Check the jumper settings to ensure that the jumpers
are properly set. If in doubt, refer to the "Board
Configuration" section.
2) Verify that all SIM modules are seated securely into
the bank sockets.
3) Make sure that the SIM modules are in the correct
locations.
4) Check that all populated memory banks are
completely filled. If not, fill them completely.
5) If your board fails to function, place the board on a
flat surface and seat all socketed components (gently
press each component into the socket).
4-1 u Troubleshooting Checklist