Write To Cmos And Exit; Do Not Write To Cmos And Exit - DFI 486-OCV Plus User Manual

Use the arrow keys to select the desired options, and
press <Esc> to exit when done.

Write to CMOS and Exit

When all the changes have been made, highlight "Write
to CMOS and Exit" and press <Enter>. The message
below will appear:
Type "Y" and press <Enter>. The modifications you
have made will be written into the CMOS memory, and
the system will reboot. You will once again see the
initial diagnostics on the screen. If you wish to make
additional changes to the setup, press <Del> after
memory testing is done.

Do Not Write to CMOS and Exit

When you do not want to save the changes you have
made, highlight this option and press <Enter>. The
message below will appear:
Want to quit without saving(Y/N)? N
Type "Y" and press <Enter>. The system will reboot
and you will once again see the initial diagnostics on the
screen. If you wish to make any changes to the setup,
press <Del> after memory testing is done.
Write to CMOS and Exit (Y/N)? N
Initial Setup Program u 3-11
486-OCV Plus