DFI 486-OCV Plus User Manual page 31

486-OCV Plus
CPU Pin 1
Positioning the CPU Above the ZIF Socket
Gently push the handle down until the handle locks into
place. You will hear a click when the handle is secure.
When you want to remove the chip, simply lift the
handle and remove the chip.
Warning:
The cables (floppy drive, hard drive, CD-ROM, etc.)
must be routed clear of the CPU with a minimum of
0.25" horizontal clearance to allow heat dissipation.
A minimum of 1.4" vertical clearance (measured above
the socket surface) must be kept free above the CPU.
Do not run cables or other obstructions in this area.
Installation Overview u 2-24