Hard Disk Utility - DFI 486-OCV Plus User Manual

Pentium OverDrive Ready System Board
TM
The screen displays the parameters detected and allows
you to accept or reject the parameters. Type "Y" and
press <Enter> to accept the parameters or press <Esc>
to abort. If you select "Y", the parameters for hard disk
Type 47 will be displayed in Standard CMOS Setup. If
you select "N", the parameters in the Standard CMOS
Setup will remain the same.

Hard Disk Utility

This option will format, set the interleave mode, and do
a media analysis of your hard drives. Highlight this
option and press <Enter>. A screen similar to the
following one will appear.
Note:
DO NOT use this utility on IDE hard drives. Using
this utility can severely damage your IDE hard drive.
3-10 u Initial Setup Program