Advanced Cmos Setup - DFI 486-OCV Plus User Manual

486-OCV Plus
If none of the pre-set types is appropriate for your hard
drive, choose 47, which is the user-definable type. To
use this type, highlight either hard disk C or D, depend-
ing on your hard drive configuration. Use the <Page
Up> key until type 47 is showing. Fill in all the param-
eters as specified by the drive manufacturer. To move
between parameters, hit the <Enter> key.
When you are through making changes, press <Esc> to
return to the main menu.

Advanced CMOS Setup

If you highlight "Advanced CMOS Setup" and press
<Enter>, a screen similar to the following one will
appear:
Use the arrow keys to move the highlight bar to the
options you wish to change or modify. Use the <Page
Up> or <Page Down> keys to make the corresponding
changes.
Initial Setup Program u 3-5