DFI 486-OCV Plus User Manual page 34

Pentium OverDrive Ready System Board
TM
Step 5
Insert the SIM modules into the SIMM banks on the
486-OCV Plus. The quantity and location of the SIM
modules is dependent upon the memory configuration
and type of modules you intend to use.
Step 6
Set the corresponding jumpers.
Step 7
Install the prepared 486-OCV Plus system board into the
case and replace the screws.
Step 8
Reinstall all cards and connectors and replace the system
unit cover. Reconnect all power cords and cables.
2-27 u Installation Overview