Auto Detect Hard Disk - DFI 486-OCV Plus User Manual

486-OCV Plus
Press any key on the keyboard to return to the message
below:
Enter NEW Password:
Type in a password that is six characters long or shorter.
When done, you will be asked to verify the new
password:
Re-enter NEW Password:
Type in exactly the same password. Failure to do so
will yield the error message shown below:
Error, press any key
If you receive this error, you will have to start all over.
After typing in the new password, the message below
will appear:
New password installed
Press the <Esc> key to return to the main menu.

Auto Detect Hard Disk

This option detects the hard disk parameters for the hard
disk drives installed in your system. Highlight this
option and press <Enter>. A screen similar to the
following one will appear.
Initial Setup Program u 3-9