Softkeys; Idle State - Aastra 480i User Manual

an 01 10:10am
L1 Connected
> 1202
Michelle LeBlanc
Drop
The display will show what line
the call information is referring to
(L1, L2, L3, etc.), the Caller ID
information (name and number,
if available), the call status
(Connected, Ring, Hold etc.) and
the timer specific to that call.

Softkeys

Your 480i has 6 softkey access
buttons, 3 on either side of the
phone's display. The softkey
menus will change depending on
the phone's state, displaying rele-
vant softkeys only. These softkeys
are pre-programmed for the call
handling and extension manage-
ment features of BroadSoft's
BroadWorks services by default.
Note: The softkeys outlined in this
manual represent the default
arrangement of softkeys; how-
ever, these default softkeys can
be overwritten with custom
softkeys by your system or
network administrator through
the configuration files for the
phone. For more information on
how to configure these softkeys,
system or network administra-
tors should refer to the adminis-
tration guide for these phones.

Idle State

The Idle State menu appears
00:27
when your phone is not in use.
The default softkeys in the Idle
State menu allow you to make
calls, pickup calls, check voicemail,
manage your extension, and more.
The following image is of
the Idle State screen with some
example softkeys:
Press the More softkey to access
Idle State softkeys on the next
screen.
Press the Back softkey to access
Idle State softkeys on the previous
screen.
480i BroadSoft IP Phone User Guide
ue Jan 01 10:10am
Joe Smith
1201
1
Unpark
CallReturn
Speed Dial
ue Jan 01 10:10am
Joe Smith
1201
1
CallFwdOn
CallFwdOff
Back
ue Jan 01 10:10am
Joe Smith
1201
1
CLID Block Clear MWI
race Cancel CW
Back
Portal
Pickup
More
DND On
DND Off
More
9