Callfwd (Call Forwarding) On And Off; Dnd (Do Not Disturb) On And Off; Clidblock (Caller Id Block); Trace (Customer Originated Trace) - Aastra 480i User Manual

CallFwd (Call Forwarding)
On and Off
The CallFwdOn and CallFwdOff
softkeys have been set up to use
the Call Forward Always feature.
To forward all calls to another
number, press the CallFwdOn
softkey and dial the number you
wish
to forward calls to. When this has
been activated, calls will always be
forwarded to this number
regardless of the condition. To
remove call forwarding, press the
CallFwdOff softkey. By default, the
CallFwdOn softkey dials *72 and the
CallFwdOff softkey dials *73.
DND (Do Not Disturb)
On and Off
To activate the DND (Do Not
Disturb) feature, press the DND On
softkey. When DND is activated,
your phone will not be alerted to
any calls. Instead, all calls to your
phone will go directly to your
voicemail or re-routed according to
what other call management rules
have been set up. To deactivate
the DND feature, press the DND Off
softkey. By default the DND On
softkey dials *78 and the DND Off
softkey dials *79.

CLIDBLOCK (Caller ID Block)

When a call is placed after pressing
this softkey, this feature blocks
your caller ID from being
displayed to the called party. To
use this feature, press the
CLIDBLOCK softkey and then dial the
number you wish to call. By
default, the CLIDBLOCK softkey dials
*67.
20 480i BroadSoft IP Phone User Guide
Trace (Customer
Originated Trace)
Press the Trace softkey to
activate the trace feature. This
feature allows you to start a trace
for the identification of the
last incoming call. By default,
the Trace softkey dials *57.
Clear MWI (Clear Message
Waiting Indication)
Press the Clear MWI softkey to
clear any visual or audible message
waiting indicators on this or
other devices attached to your
number. By default, the Clear MWI
softkey dials *99.
Cancel CW (Cancel
Call Waiting)
Press the Cancel CW softkey to
turn the Call Waiting service off
for the next call. The next call
you make will be uninterrupted
by Call Waiting. The Call Waiting
service will automatically turn
on after this next call. By default,
the Cancel CW softkey dials *70.