Getting Started; When You First Plug In Your Phone; Updating Your Phone; Start Up Screens - Aastra 480i User Manual

Getting Started

When You First Plug in Your
Phone
The 480i automatically begins the
start up sequence as soon as it is
connected. The phone goes
through this process the first time
you plug in your phone and every
time you restart your phone. The
first screen the phone displays is
the Aastra splash screen.

Updating Your Phone

After displaying the Aastra splash
screen, the 480i will check settings
and check for new updates on the
server for the configuration files
and firmware. If a new update is
found, the phone will display
what kind of update it is installing
(either "Updating Config" or
"New Firmware"). This may take
a few moments while the phone
downloads the latest updates.
Your system or network
administrator will set up new
updates on the server.
Important! Do not unplug or
remove power to the phone while
it is checking or installing
firmware.
hecking for Firmware
Do not unplug phone!

Start up Screens

After the phone displays
the Aastra splash screen or after
downloading an update (if an
update was available), the phone
will display the Idle State screen:
on Apr 17 11:30pm
Unpark
Call Return
Speed Dial
Note: The Idle State screen on your
phone may not look exactly as
represented here. The softkeys
and screen configurations shown
are the typical default settings.
Your network or system adminis-
trator may have changed some
of these settings.
480i BroadSoft IP Phone User Guide
60%
Joe Smith
1101
Portal
Pickup
ore
3