Connected State - Aastra 480i User Manual

indicator on the Supervisor's
phone shows that the worker's
phone is in use and busy.
On the 480i, the busy and idle
indicators show on the IP phone
screen display next to the softkey
programmed for BLF functionality.
When the monitored user is idle,
an icon with the handset on-hook
shows next to the BLF softkey.
When the monitored user is on an
active call, a small telephone icon
is shown with the handset off-
hook.
Softkeys as Customized BLF List
(For use with the BroadSoft
Broadworks Rel 13 or higher
platform only)
The BLF List feature on the IP
phones is specifically designed to
support the BroadSoft Broadworks
Rel 13 Busy Lamp Field feature.
This feature allows the IP phone to
subscribe to a list of monitored
users defined through the
BroadWorks web portal.
In addition to monitoring the idle
and busy state, the BLF\List feature
also supports the ringing state.
When the monitored user is idle,
there is a small telephone icon
shown with the handset on-hook.
When the monitored user is in
ringing state, there is a small bell
icon shown. When the monitored
user is on an active call then a
small telephone icon is shown with
the handset off-hook.
The Broadworks BLF feature is not
the same as the Broadworks
Shared Call Appearance (SCA)
feature and does not permit call
control over the monitored
extension.
Example
A receptionist has a 480i phone
running Broadsoft firmware that
subscribes to a list of extensions
from the BroadWorks Application
Server. Each monitored extension
in the list shows up individually on
the 480i screen next to a softkey
button. The softkey icons on the
screen change depending on the
state of the extensions. On the
9133i running Broadsoft firmware,
the programmable key LEDs
illuminate either flashing, solid, or
turn off depending on the state of
those extensions.

Connected State

The connected state screen will
appear when you are talking to
someone on the phone. Connected
state functions are available as
softkeys on the connected state
screen, as well as hard keys on the
phone. These softkeys and hard
keys allow you to handle calls, such
as transferring, conferencing, and
placing calls on hold.
an 01 10:10am
L1
> Michelle LeBlanc
1202
Drop
If softkeys have been configured
as line/call appearances and you
are connected to a call, the line/call
appearance softkeys will display
beneath the Drop softkey. Pressing
the Drop softkey will disconnect
you from the call you are
connected to.
480i BroadSoft IP Phone User Guide 13
10:15
Connected