Softkeys - Aastra 6739i User Manual

Softkeys

On the 6739i, you can configure up to 55 multi-functional softkeys using the IP Phone UI or the Aastra Web UI. The idle
screen displays up to 12 softkeys. If you configure more than 12 softkeys, the 12th key displays as a "More" key. Pressing
the "More" key allows you to toggle between multiple screens of configured softkeys.
Note:
If an Expansion Module is attached to the phone, you can configure additional softkeys. For more information about
expansion modules, see "Model M670i and M675i Expansion Modules"
The following table lists the functions you can set on the softkeys and provides a description for each function,.
Key Function Description
None Indicates no setting for the key.
Line Indicates the key is configured for line use.
Speed Dial Indicates the key is configured for speed dial use. You can also configure a prefix for a speed dial number.
Do Not Disturb Indicates the key is configured for "do not disturb" on the phone.
Busy Lamp Field (BLF) Indicates the key is configured for Busy Lamp Field (BLF) use. User can dial out on a BLF configured key.
(Maximum of 50 BLFs allowed on M670i Expansion Module.)
BLF/List Indicates the key is configured for BLF list use. User can dial out on a BLF/List configured key.
Auto Call Distribution (ACD) (For Sylantro Servers)
Indicates the key is configured to allow the Sylantro server to distribute calls from a queue to registered IP phone
users (agents).
Directed Call Pickup (DCP)/ (Feature dependant on your call manager)
Group Call Pickup (GCP) Indicates the key is configured to allow you to intercept - or pickup - a call on a monitored extension(s).
XML Indicates the key is configured to accept an XML application for accessing customized XML services. You can also
specify an XML key URL for this option.
Flash Indicates the key is set to generate a flash event when it is pressed on the 6739i. The IP phone generates flash
events only when a call is connected and there is an active RTP stream (for example, when the call is not on hold).
Sprecode Indicates the key is configured to automatically activate specific services offered by the server. For example, if the
sprecode value of *82 is configured, then by pressing the sprecode key, *82 automatically activates a service pro-
vided by the server. Contact your System Administrator for available services.
Park Indicates the key is configured to park incoming calls when pressed.
Your System Administrator must set configuration parameters before you can use the Park feature.
41-001317-05 REV01 – 06.2013
L1 John Smith 401
Home
John Smith
402
401
403
404
405
406
Softkeys
(state-based)
Mon Jan 1
12 : 45pm
503
Office
BLF
Park
Pickup
More
Softkeys
on page 193.
Options Key
81