Running The Navigator Cd-Rom On A Windows Pc; Contents Of The Navigator Cd-Rom - Windows Pc - HP NetServer LC 2000r Installation Manual

Chapter 10
3. Use the arrow keys to move the cursor, press [Enter] to select an option,
and press [Esc] to exit.
4. To change adapter settings:
Select an adapter from the list in the main menu.
Select Adapter Setup. This option configures the SCSI ID setting and
other advanced adapter settings.
5. To format a hard disk or change hard disk parameters:
Select an adapter from the list in the main menu.
Select Device Selections.
Select the hard disk to format.
Select Format menu option.
For more information, refer to "Information Assistant" on the HP NetServer
Online Documentation CD-ROM.

Running the Navigator CD-ROM on a Windows PC

Using the HP Navigator CD-ROM in any Windows PC does not allow you to
perform any configuration tasks, but it does allow you to view the configuration
instructions before or after installing and setting up your HP NetServer. The
Navigator CD-ROM will autorun on any PC with Windows 95 , Windows 98 , or
Windows NT .
Contents of the Navigator CD-ROM – Windows PC
The Main Menu provides you with options to view and print configuration
information. The menu and submenu buttons are listed here with a brief
description for each selection.
l What's New on the CD – This menu selection provides the part number
and version of the CD as well as a status report about the systems
supported by this CD. It also provides the Internet address for the latest
information including release notes about your HP NetServer.
l System README – This file includes the most recent information that
was not included in the printed installation documentation.
122
Configuring the HP NetServer