Up-To-Date Configuration Details - HP NetServer LC 2000r Installation Manual

Chapter 10
l HP Server Management Solutions – This menu selection provides you with
a comprehensive suite of utilities, applications, and built-in features to
manage multiple HP NetServers locally or from remote locations. This
menu selection is the same one offered by the Navigator CD-ROM if run
on the HP NetServer.

Up-to-Date Configuration Details

You can find up-to-date configuration information on the HP NetServer Navigator
CD-ROM, in "What's New on the CD," in "System README," or in "Guide to
Configure Server." Use these sources to learn about applicable compatibility
issues and get the latest list of HP-tested peripherals and accessories. Refer to the
Test Products List in Configuration Advisor.
These files include the most recent information that was not included in the
printed installation documentation. Refer to following procedure to view these
files.
1. Ensure the PC is powered on.
2. Press the CD-ROM drive eject button.
3. Place the HP NetServer Navigator CD-ROM in the drive, and press the
eject button again to close the drive.
The CD-ROM will start automatically using the auto-run feature as soon as
the drive closes.
4. If the CD-ROM does not start automatically, push the eject button on the
CD drive and re-insert the CD-ROM.
The opening screen of the HP Navigator prompts you to select a HP
NetServer model.
5. Select the HP NetServer LC 2000 from the pull down list of NetServer
models.
6. Press the Continue arrow icon at the bottom right of the screen.
The next screen appears prompting you to select a NOS (Network
Operating System).
7. Scroll down through the list of supported NOS and selected the NOS used
with this installation.
The HP Navigator main menu appears.
124
Configuring the HP NetServer