HP NetServer LC 2000r Installation Manual page 170

Appendix A
Power Supply
AC Voltage selection for this NetServer is automatically determined by the power
supply.
Table A-3. Power Supply Requirements (Single Unit)
AC Input Power (50/60 Hz)
Maximum Continuous
Input Power
Output Power
The power cord set found in your shipping box has been approved for use in the
country where the NetServer was purchased. If any other power cord set is used, it
must meet appropriate safety requirements in the country in which the NetServer
is to be used.
Table A-4. General Cord Set Requirements
Cord set
(Approved or
recognized by
safety agency in
country of use.
Maximum length
162
100 to 127 VAC, 5.5 A
200 to 240 VAC, 2.6 A
540 watts maximum
349 watts maximum
250 VAC, 10 A
125 VAC, 10 A
2.4 m (8 ft)
Specifications