HP NetServer LC 2000r Installation Manual page 55

Chapter 4
3. Remove any drive spacers, if necessary:
a Slide the drive spacer back, a fraction of an inch away from your body
as you face the front of the drive.
Drive spacers attach to the disk drive module with four small feet.
b. Tilt up the front of the drive spacer to disengage the front two feet.
c. Pull the drive spacer forward slightly to disengage the back two feet
and lift. See Figure 4-9.
Figure 4-9. Removing the Drive Spacer
Installing Mass Storage Devices
Drive Spacer
47