HP NetServer LC 2000r Installation Manual page 92

Chapter 8
14th Hole
From Bottom
2nd Hole
From Bottom
Figure 8-3. Location Marks on the Rack's Front Columns
5. Turn the template over and use it to mount rack nuts (at 7th and 9th holes)
on the left-rear and right-rear rack columns.
The template provides you with the nut placement locations. If you don't
have the template, Figure 8-4 shows rack nut placement for the two rear
rack columns.
Left
Rear of
Rack
Attach nuts to this face
of the rear columns.
Figure 8-4. Rack Nut Locations on the Rack's Rear Columns
84
"#" represents
the EIA unit
#
numbers on the
rack columns.
#
#
Left
#
#
Bottom of
HP NetServer
#
Right
Bottom of
HP NetServer
Rack-Mounting the HP NetServer
Front of
Rack
Right
Mark this face of the
left-front and
right-front columns.
represents
"#"
the EIA unit
#
numbers on the
rack columns.
#
# 9th Hole
From Bottom
7th Hole
#
From Bottom
#