IBM eServer BladeCenter JS20 Installation And User Manual page 90

Checkpoint code Description
E1F8 Build the boot list for SCSI adapters.
The location of the SCSI adapter
being scanned is also displayed.
E1F9 Build the boot list for Fibre Channel
adapters. The location of the SAN
adapter being scanned is also
displayed.
E1FC Build the boot list for serial storage
architecture (SSA) adapters. The
location code of the SSA adapter
being scanned is also displayed.
E1FD E1FD and another progress code
(Exxx) will alternate in the operator
panel. The other code is where the
error occurred.
E1FE Build the boot list for Fibre Channel
adapters. The world-wide port
number (WWPN) of the storage area
network (SAN) adapter being
scanned is also displayed.
E1FF Building the boot list for Fibre
Channel adapters. The WWPN of the
SAN adapter being scanned is also
displayed.
E200 Master I
E201 The flash RAM cyclic redundancy
check (CRC) checksum is valid.
E202 Programmable interrupt controller
(MPIC) initialization.
74
BladeCenter JS20 Type 8842: Installation and User's Guide
2
C initialization.
Suggested action
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.