IBM eServer BladeCenter JS20 Installation And User Manual page 82

Checkpoint code Description
D099 Start the system information
validation utility.
D100 The system serial number was found
to be blank.
D101 A machine serial number has been
entered.
D102 The machine type field has been
found to be blank.
D103 The machine type has been entered.
D104 The model field has been found to be
blank.
D105 The machine type has been entered.
D106 The universal unique identifier (UUID)
universal is blank; the new value has
been calculated and the field has
been updated.
D5BB There is a startup delay with the
countdown for overriding or modifying
the startup behavior.
E101 Create a run-time abstraction service
(RTAS) node.
E102 Load and initialize the RTAS.
66
BladeCenter JS20 Type 8842: Installation and User's Guide
Suggested action
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Enter a valid serial number. The backspace and
delete keys can be used to edit the value entered.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
Re-enter the serial number used for D100. The
backspace and delete keys can be used to edit the
value entered.
1. Enter a valid machine type. The backspace and
delete keys can be used to edit the value entered.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for assistance.
Re-enter a valid machine type. The backspace and
delete keys can be used to edit the value entered.
1. Enter a valid machine model. The backspace and
delete keys can be used to edit the value entered.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for assistance.
Re-enter a valid machine type. The backspace and
delete keys can be used to edit the value entered.
This error indicates that you might have a problem with
the system board. Contact a service support
representative for assistance.
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for assistance.
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for assistance.
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for assistance.