IBM eServer BladeCenter JS20 Installation And User Manual page 101

Table 2. Abbreviated list of firmware error codes (continued)
Error code Failing device or problem found
21020014 The USB CD-ROM drive: the CD has
been changed.
21020015 The USB CD-ROM drive: failure of
ATA or ATAPI packed command
processing by USB CD-ROM drive.
22000001 Peripheral component interconnect
(PCI) Ethernet adapter failure.
22001001 PCI Ethernet adapter failure.
22001002 PCI Ethernet adapter failure.
22010001 PCI Ethernet adapter failure.
22011001 PCI Ethernet adapter failure.
22003002 Gigabit Ethernet adapter failure.
Suggested action
1. Retry the operation.
2. Check the http://www.ibm.com/pc/support/ Web site for
firmware updates for the management module, service
processor, and blade server. Apply the latest updates,
if they are available.
3. If updates are not available, contact your system
administrator for assistance.
4. If the problem remains, replace the USB CD-ROM
drive.
5. If the problem remains, replace the system board.
Contact a service support representative for
assistance.
1. If the problem remains, remove the CD and insert
another CD. The CD in the USB CD-ROM drive might
not be readable.
2. Check the http://www.ibm.com/pc/support/ Web site for
firmware updates for the management module, service
processor, and blade server. Apply the latest updates,
if they are available.
3. If updates are not available, contact a system
administrator for assistance.
4. If the problem remains, replace the USB CD-ROM
drive.
5. If the problem remains, replace the system board.
Contact a service support representative for
assistance.
Replace the adapter.
Replace the adapter.
Replace the adapter.
Replace the adapter.
Replace the adapter.
If the location code identifies a slot:
1. Reseat the adapter and restart the blade server.
2. Replace the adapter.
3. Check the http://www.ibm.com/pc/support/ Web site for
system firmware updates. Apply the latest update, if
one is available.
4. If an update is not available, contact a system
administrator for assistance.
If the location code identifies the system, replace the
system board. Contact a service support representative
for assistance.
Chapter 8. Solving problems
85