Table of Contents
Advertisement
A
T
UDIO
ROUBLESHOOTING
Fault description:
No transfer of audio signal between the MediaRacer® 100 Units.
1. Verify that in the MediaRacer® Link Manager Application in the Audio
page, the status field displays "Connected".
2. Verify that the audio equipment cables are properly connected to the
MediaRacer® 100 units, and in accordance with the specifications.
3. Verify that the speakers are connected and the volume not set to OFF.
4. Verify that the microphone manufacturer is Dynamic.
MediaRacer® 100 [Preliminar y]
---MAVIX---
73
Advertisement
Table of Contents
Troubleshooting
