---MAVIX---
SERIAL DATA CHANNEL
Devices that transfer data, such as PTZ control for video camera, computers, VMS
(Variable Message Sign) boards and other industrial control systems, can be connected to
RS232 (COM 1) and RS485 (COM 2) ports.
The unit supports RS485 Half and Full Duplex communication, selecteble by jumpers.
CONSOLE LED
Console LED located next to Serial Data Connector (RJ -45) indicates, that RS232
(COM1) port is chosen to be a Console Port.
SERIAL TRUNK CHANNEL - NETWORK CONNECTOR (RJ-45)
Serial Trunk Channel is a modular option for communication. This is in addition to the
primary 10/100Base-TX data trunk channel on -board. The Serial Trunk channel can be
used for standard RS232 communication with all external modem control signals and with
AT command support, built-in V-90 PSTN modem and built-in ISDN modem.
TX LED
The TX LED indicates Transmit activities over the serial trunk network.
RX LED
The RX LED indicates Receive activities over the serial trunk network.
NETWORK PORT
10/100Base-TX - Network Connector
Enables a MediaRacer® 100 unit to be connected to an Ethernet/Fast Ethernet standard
data communication network, complying with the IEEE 802.3U standard.
11
MediaRacer® 100 [Preliminar y]