Connecting The Monitor; Connecting Audio Devices - Mavix MediaRacer 100 User Manual

CONNECTING THE MONITOR

1. The monitor connection is usually made in the control room,
enabling the viewing of video pictures taken by the remote
camera. In order to attach an analog monitor to the
MediaRacer® 100 CM model, connect one end of a video
coax 75Ω cable to the video inputs of the monitor and the
other end to the VIDEO OUT connector located on front
panel of the unit.

CONNECTING AUDIO DEVICES

2. Connect a microphone to the AUDIO IN connector (located
on the rear panel of the unit).
3. Connect a speaker to the AUDIO OUT connector (located
on the rear panel of the unit).
Note: An intercom system may be used in place of a
microphone and speaker.
MediaRacer® 100 [Preliminar y]
---MAVIX---
26