Mavix MediaRacer 100 User Manual page 54

Baud Rate
Number of Bits
Stop Bits
Parity
Handshake
Connect/Disconnect
Status
MediaRacer® 100 [Preliminar y]
---MAVIX---
Drop-down window that determines the data baud-rate. When
the window is opened, select the desired value from the list of
options.
Selection of a radio-button in each of these four sections
enables the controlling of the RS485 parameters. Determining
the required value is according to the RS485 parameters of
the device connected to the MediaRacer® 100 Unit.
Two buttons enable connection/disconnection of the RS232
devices. Click the Connect button to transfer signals between
the two MediaRacer® 100 units. Click the Disconnect button
to prevent the transfer of signals.
This field displays the status of the MediaRacer® 100 units.
The display options are Connect or Disconnect
54