Power - Dc Connector; Dio (Discrete Input/Output) Channels - Mavix MediaRacer 100 User Manual

---MAVIX---
P - DC C
OWER ONNECTOR
The POWER DC connector is used to connect the cable of the desktop power supply 5V
to the MediaRacer® 100 unit.

DIO (DISCRETE INPUT/OUTPUT) CHANNELS

DIO devices, such as sensors (temperature, light etc.), automatic gate opening controls and
alarms can be connected to a Discrete Input/Output (DIO) block terminal. The DIO block
terminal has two dry-contact input and two opto-isolated output ports.
The positive terminal of the DO should be connected to one end of the relay coil, while the
second end is connected directly to the external power supply positive output.
The negative terminal of the DO should be connected to the external power supply GND
output.
The ON/OFF switch can be directly connected between (+) and (–) terminals of the
Discrete Inputs.
14
MediaRacer® 100 [Preliminar y]