Table of Contents
Advertisement
LNK LED
The LNK LED lights when a communication link signal is received in the MediaRacer®
100 unit. The lit LED indicates that a connection to the network has been established.
ACT LED
The ACT LED indicates data activity over the network.
SYSTEM INDICATORS
ON – Power LED
The ON LED lights when the system is connected to a power supply and is switched on.
The ON LED will blink every 5 seconds, which indicates proper system operation.
FLT LED
When the FLT LED is lit or blinking, it indicates one of the following problems:
?
The MediaRacer® 100 unit failed during the self-test.
?
The system failed to initialize the operation software in Application mode.
?
The MediaRacer® 100 unit began the reset cycle.
MediaRacer® 100 [Preliminar y]
---MAVIX---
12
Advertisement
Table of Contents
Troubleshooting
