Table of Contents
Advertisement
V
T
IDEO
ROUBLESHOOTING
Fault description:
The monitor does not display video picture (while camera is transmitting).
1. Verify that in the MediaRacer® Link Manager Application in the Video
page, the status field displays "Connected".
2. Verify that the cables of the equipment (camera and monitor) that are
connected to the MediaRacer® 100 Camera Side unit and the
MediaRacer® 100 Monitor Side unit, are firmly in place.
3. Verify that the camera is working properly by connecting it directly to the
monitor.
4. Verify that the input to which the camera is connected is the one where the
green LED is lit.
5. The video is not displayed continuously - Disconnecting image problem
1. Verify that the bit -rate is appropriate to the bandwidth
allocated by the network. If the bit-rate is too high, reduce
its value so that it matches the broadband.
MediaRacer® 100 [Preliminar y]
---MAVIX---
72
Advertisement
Table of Contents
Troubleshooting
