Mavix MediaRacer 100 User Manual page 49

Resolution
Field(s) Per Second
MediaRacer® 100 [Preliminar y]
---MAVIX---
Slider that determines the resolution of the
picture transmitted. The default setting is
FULL. Reducing resolution is done by
dragging the slider tag horizontally
downwards. The selected value resulting
from the dragging of the tag is displayed in
the field to the right of the slider.
Possible values are as follows: FULL> SIF>
QSIF> QQSIF> QQQSIF>
FULL
SIF
QSIF
The maximum value for the number of
pictures transmitted per second is
determined by the method of transmission
used by the camera. (PAL or NTSC).
According the specifications of the camera
connected to the MediaRacer® 100 Camera
Side unit, click on the appropriate radio-
button. The Horizontal dragging of the
slider changes the number of pictures
(fields) per second that are transmitted by
the camera. The selected value is displayed
in the field to the right of the slider. Only in
Full position the transmitted video picture
consists of two fields per picture. A change
in the value of the Fields(s) per second
causes an automatic updating of Bit Rate
NTSC PAL
720x480 720x576
352x240 352x288
176x120 176x144
49