System Installation; Figure 2.1: Top Cover - Advantech ACP-7000 User Manual

Chapter 2 System Setup

2.1 System Installation

WARNING: Before starting the installation process, be sure to
2.1.1 Attaching the handles.
The handles for the front panel are in the accessory box. To install the
handles, simply secure them to the front panel with the provided screws.
2.1.2 Removing the top cover and backplane holder
First, remove the chassis cover. The top cover is fixed to the chassis by
two thumbscrews.
1. Release two thumbscrews on the rear upper location of the chassis.
2. Lift the cover.
ACP-7000 User's Manual
shut down all power from the chassis. Do this by
turning off the power switch, and unplugging the
power cord from the power outlet. When in doubt,
consult with an experienced technician.

Figure 2.1: Top Cover

10