Chapter 2 System Setup; System Installation; Attaching The Handles; Removing The Top Cover And Backplane Holder - Advantech ATM-4023 User Manual

Chapter 2 System Setup

2.1 System Installation

Warning

2.1.1 Attaching the Handles

The handles for the front panel are in the accessory box. To install the
handles, secure them to the front panel with the provided screws.

2.1.2 Removing the Top Cover and Backplane Holder

1. First, remove the chassis cover. The top cover is fixed to the chassis
by two thumbscrews.
2. Release two thumbscrews on the rear upper location of the chassis.
3. Lift the cover.
ATM-4023 User Manual
Before starting the installation process, be sure to
shut down all power from the chassis. Do this by
turning off the power switch, and unplugging the
power cord from the power outlet. If in doubt,
consult with an experienced technician.
Figure 2.1: Top Cover
8