Installing Hot-Swap Hard Drives; Figure 4-9 Removing Hdd Carrier - Silicon Graphics UV 20 System User's Manual

4: Chassis Maintenance

Installing Hot-Swap Hard Drives

32
Caution: To maintain proper system cooling, use drive carriers with plastic drive blanks to
populate drive days that would be otherwise empty.
To install a HDD into the chassis, use the following steps.
1. Remove the drive carrier by pressing the green latch to unlock it.
See A in Figure 4-9.
2. Pull out the black lever and slide the carrier out.
See B in Figure 4-9.
Figure 4-9
Removing HDD Carrier
007-5900-001