Silicon Graphics UV 20 System User's Manual page 17

007-5900-001
Table 1-1 Features and Configuration Options (continued)
Feature
Riser Cards
Video
On-board Storage Controllers
and Options
Server Management
Power Supply Options
Storage Bay Options
Solid-State Drive (SSD)
Support
Rack Mount Kit Options
Description
Support for two riser card slots. Each riser card slot supports three PCIe
Gen 3 x16 slots.
– Integrated 2D video controller
– 16 MB DDR3 memory
– One low-profile eUSB 2x5 pin connector to support low-profile
eUSB solid state devices
– Two single-port SATA connectors capable of supporting up to
6 GB/sec
– Two 4-port mini-SAS connectors supporting up to 3 GB/s SAS/SATA
Integrated Baseboard Management Controller (IPMI 2.0 compliant)
Two power supplies with the following options:
– 1600W (1+1), redundant, hot-swap capable
– 1600W (1+0 or 2+ 0), not redundant
8 x 2.5" SATA/SAS hot-swap HDD bays
Up to two 2.5" internal SSDs are supported.
Basic slide rail kit, bundled with system package
System Features and Configuration Options
3