Wells M4200 Owner's Manual page 14

9. Reinstall the fan baffle, paying
particular attention that
the lip on the right side of the fan
baffle is fully seated in the slot in
the edge of the oven cavity.
Reinstall rack supports and racks.
10. Turn power switch to FAN . Verify
that fan runs smoothly and does
not contact fan baffle.
Turn power switch to OFF.
Reposition fan baffle if necessary.
11. Wipe down the prep top and
exterior of the oven using a
soft cloth dampened with clean
water and a mild detergent.
A nylon scouring pad may be used
to removed baked-on food debris.
Rinse by wiping with a cloth or
sponge dampened with clean water.
IMPORTANT: Always wipe or rub in the direction of the polish lines or grain of the
metal.
12. Replace oven rack supports. Install product racks in positions 2, 3 & 8. Leave the
door open overnight.
PROCEDURE IS COMPLETE
PREVENTATIVE MAINTENANCE
CLEANING INSTRUCTIONS
CONVECTION OVEN M4200
page 2 of 2
12
PM 903.1
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, P. O. Box 280
Verdi, NV 89439
Customer Service (775) 345-0444 Ext.502
fax: (775) 345-8238
www.wellsbloomfield.com