Safety Procedures - Wells M4200 Owner's Manual

Wells m4200 convection oven owner's manual

Hide thumbs Also See for M4200:

Owner's manual (36 pages)

Table Of Contents

Table of Contents

Knowledge of proper procedures is essential to the safe operation of electrically energized equipment. In

accordance with generally accepted product safety labeling guidelines for potential hazards, the following

signal words and symbols are used throughout this manual.

DANGER -

DANGER

severe personal injury, death, or substantial property damage in the event the state-

ment is ignored.

WARNING -

personal injury, possible death or major property damage in the event the statement is

ignored.

CAUTION -

cause minor personal injury, or property damage in the event the statement is

ignored.

NOTE -

Note is used to notify personnel of installation, operation or maintenance information

which is important, but not hazard related.

PRECAUTIONS AND GENERAL INFORMATION

This appliance is intended for use only in commercial establishments to cook food products for

human consumption. No other use is recommended or authorized by the manufacturer or its

agents.

This appliance is intended for use only in commercial establishments, where all operators are

familiar with the appliance use, limitations and associated hazards.

Operating instructions and warnings must be read and understood by all operators and users.

All servicing (other than setting temperature and timing controls) must be performed by an

authorized service agent.

Appliance power supply must be unplugged from electrical power when not in use for extended

periods of time. Power cord must not be draped across other appliances, nor across the gas flue of

any gas-fired equipment.

Unless otherwise noted, this piece of equipment is made in the USA and has American sizes on

hardware.

Any trouble shooting guides, component views or parts lists included in this manual are for general

reference only, and are intended for use by qualified technical personnel.

This manual should be considered a permanent part of this appliance. This manual and all

supplied instructions, diagrams, schematics, parts break downs, notices and labels must remain

with the appliance if it is sold or moved to another location.