Port State Indicators - Planet SOHOConnect DHD-801 User Manual

SOHOConnect Series
♦ 10M Collision (COL 10M, DHD-1601)
This indicator indicates data collisions on the respective
10Mbps Ethernet segments of the hub. (If several hubs
are linked together, all of them should detect and
indicate the same collision, since collisions span the
entire network segment.)
detected, the respective 10 COL indicator will briefly
blink amber.

Port State Indicators

There are two port state indicators for each of the twisted-
pair ports on the hub. Each port's LED status indicators
report the port is working on 10Mbps mode or 100Mbps
mode, and indicator for link or activity status.
The following describes each indicator and the meaning of
each condition:
♦ Link/Active
This indicator green when the port is connected to a
either Ethernet or Fast Ethernet station , If the station
to which the hub is connected is powered off, or if there
is a problem with the link, the LED will remain off. And
the indicator blinking green when the data will be
received to all other connected ports.
♦ 100Mbps (Speed)
This indicator green when the port is connected to a
100Mbps Fast Ethernet station and remains on. If the
station to which the hub is connected is powered off, or
if the connected station is an Ethernet device, the LED
will remain off.
8
Whenever a collision is
Understanding Indicators