Figure 2.1 Device Manager - Advantech PCIE-1753 User Manual

After the PCIE-1753 card is installed, you can verify whether it is properly installed on
your system through the Device Manager:
1. Access the Device Manager through Control Panel/System/Device Manager.
2. The device name of the PCIE-1753 should be listed on the Device Manager tab as
follows.
Note! If your card is properly installed, you should see the device name of your
card listed on the Device Manager tab. If you do see your device name
listed on it but marked with an exclamation sign "!", it means your card
has not been correctly installed. In this case, remove the card device
from the Device Manager by selecting its device name and press the
Remove button. Then go through the driver installation process again.
After your card is properly installed on your system, you can now configure your
device using the Advantech Navigator after you install DAQNavi on your computer.
PCIE-1753 User Manual

Figure 2.1 Device Manager

8