Print Preferences - 3D Printing Systems UP MINI User Manual

3.3.6 Print Preferences

Preferences
Click menu "3D Print->Setup >Setup" or Click "print" and select "Preferences' and the following dial
box opens:
Recommended Settings in red in red and in most cases are the only values that require changing d
pending on the model you are printing. pending on the model you are printing.
Windows version Windows version
Z Resolution:
Sets the print resolution (layer resolution (layer thickness) of the printer. This can be between 0.2
0.4mm per layer. The finer the layer thickness, the better quality, the stronger the printed part and
the longer it takes to print.
Fill:
There are four types of honeycomb types of honeycomb fill that the interior of parts are made of. These cut away i
ages show the four different internal fill types. ages show the four different internal fill types.
UP Mini 3D Printer User Manual 3D Printer User Manual
and in most cases are the only values that require changing de-
of the printer. This can be between 0.2mm per layer to
the layer thickness, the better quality, the stronger the printed part and the layer thickness, the better quality, the stronger the printed part and
Solid Honeycomb: The part is made
plastic, which gives you the strongest part with a plastic, which gives you the strongest part
longer print time. This setting is recommended for
strong and functional parts.
Semi-Solid Honeycomb
he following dialog
Mac version Mac version
These cut away im-
art is made of nearly solid
. This setting is recommended for
33