Assembly Instructions - Landice Pro Sports Trainer Quick User Manual

STEP 1:
Unbolt treadmill from pallet
• On L7 treadmills it is necessary
to remove the bolts which hold
the treadmill to the pallet.
• Start by removing the top bolts.
• Lay the treadmill on the ground,
and then remove the bottom
bolts by placing the treadmill on
your toolbox.
• With the bolts removed, the
treadmill will be free to move
around in the box.
STEP 4:
Mount the upright
• Slide the upright down onto
the 8-side frame bolts. Be sure
the washers are located on the
outside of the upright and
against the head of the bolt.

Assembly Instructions

STEP 2:
Cut the box off the pallet
• Remove the metal strapping
around the box.
• Using a razor blade knife, cut the
box just above the bottom row
of brass staples along all sides of
the box.
• DO NOT cut through the center
of the box, as you could hit the
treadmill.
• Remove the box and discard.
STEP 5:
Secure upright to frame
• Tighten bolts with a 7/16"
extended socket.
• If installing an L9 or medrails,
turn to the appendix for installa-
tion instructions.
STEP 3:
Unstrap the treadmill
• The treadmill components are
held together with plastic
strapping.
• Carefully cut and remove the
strapping. Remove the tread-
mill upright and motor cover
from treadmill. Lift the tread-
mill off the pallet.
• Carefully remove the upright
side cover from the upright
assembly.
STEP 6: (L9 — see page 15)
Prepare to install hand rail
• The rail mounting bolts have
been threaded into the rails for
shipping. Remove them.
• Attach the U-shaped handrails
by first hand-starting the bolts
and then using a 1/2" socket
until snug.
(Do not over-tighten.)
2