STEP 1
Insert the side rail into the upper
rail clamp.
STEP 4
Fit the side rail clamp to the
bottom side frame at the hole
provided. Use a 5/16" wrench to
hold nut inside treadmill and
use 3/16" allen wrench to tighten.
Appendix B: Medrail Installation (L7)
STEP 2
Attach the medrail by first hand-
starting the bolts and then using a
1/2" socket until snug.
(Do not over-tighten.)
STEP 5
Line up the upright leg side covers
and firmly snap them into place.
STEP 3
Assemble the base as shown
inserting the bolt as represented
by the arrow.
STEP 6
Place the plastic endcaps on the
top corners of the control panel.
Use the two small Phillips head
screws included to secure the
endcaps.
(Return to step 9 in assembly
instructions)
16